The AP520 Automated Programming System is a reliable automated solution capable of producing unparalleled throughput with minimal operator intervention. It is designed to provide a one-piece-flow programming workstation capable of completing programming tasks with minimal human intervention. This handler comes standard with tray-to-tray interface and an automatic tray stacker. Tape and/or tube interfaces are optional, and laser mark or labeling of devices can be selected for this workstation.
The AP520 is equipped with two vision cameras plus an on-the-fly laser system for accurate insertion alignment. Its efficient alignment mechanism helps reduce the Teach overhead of each programming task. For various socket types with different size profiles, a Height Sensor automatically defines the ideal height for device pickup and insertion. The on-the-fly laser corrects pick-up head offset while on its way to the socket. The upward camera aligns those big devices with dimensions greater than 3.0 cm x 3.0 cm.
The AP520 is equipped with two vision cameras plus an on-the-fly laser system for accurate insertion alignment. Its efficient alignment mechanism helps reduce the Teach overhead of each programming task. For various socket types with different size profiles, a Height Sensor automatically defines the ideal height for device pickup and insertion. The on-the-fly laser corrects pick-up head offset while on its way to the socket. The upward camera aligns those big devices with dimensions greater than 3.0 cm x 3.0 cm.
Features
- Up to 16-site, pick-and-place automated device programming system.
- Throughput up to 1200 UPH under zero programming time.
- Automatic tray stacker accommodating up to 20 JEDEC or Non-JEDEC trays.
- Downward CCD camera for Teach plus on-the-fly laser alignment system.
- Dual pick-up heads on the gantry with height sensor.
- H9600 high-speed universal programmer with up to 448 pin drivers.
- Fully integrated subsystems to enable one-piece-flow operation.
- Network-oriented Windows-based Job software with USB interface.
- Optional subsystem for laser marking or labeling.
- Optional upward CCD camera or lead inspection module.
- Optional I/O media for tapes and tubes available.
Main Products
Multimedia, Power Management & Control, Wireless Communication ICs, General purpose mixed-signal ICs, Scanner ICs, IP development, Manual Device Programmers, Automated Device Programming, Testing Systems