Steel coil slitting line:
This line is designed and lined to enable to slits continuously cold and hot rolled steel and galvanized steel in coil, width into prescribes strips and then re-winds them in coils again.
Cut-to-length line:
This equipment is designed for shearing various kinds of steel coils; such us hot & cold roller carbon steel coil, and galvanized steel coil...etc.
This line is designed and lined to enable to slits continuously cold and hot rolled steel and galvanized steel in coil, width into prescribes strips and then re-winds them in coils again.
Cut-to-length line:
This equipment is designed for shearing various kinds of steel coils; such us hot & cold roller carbon steel coil, and galvanized steel coil...etc.
Specifications
- Steel Coil Slitting Line:
- Coil car
- Uncoiled
- Hold down roll
- Leveler
- Shear
- Side guide
- Slitter
- Scrap winders
- Loop table
- Tension station
- Separator
- Recoiled
- Coil car
- Hydraulic system
- Electrical system
- Lubrication system
- Cut-To-Length Line:
- Coil stand
- Coil ca
- Uncoiled
- Pinch roller
- Leveler
- Loop
- Fine leveler
- Shearing
- Conveyor
- Auto lifi-down stacker
- Run-out roller
- Hydraulic system
- Pneumatic system
- Lubrication system
- Control table
| Model | Specification | Thickness | Line speed |
|---|---|---|---|
| JSS (650) | 300-650 mm | 0.1-1.0 mm | 55-100 m/min |
| JSS-3 (650) | 300-650 mm | 0.2-3.0 mm | 45-100 m/min |
| JS3-3 (1250) | 900-1250 mm | 0.2-3.0 mm | 45-100 m/min |
| JSS-3 (1600) | 1000-1600 mm | 0.2-3.0 mm | 45-100 m/min |
| JSS-3 (1850) | 1000-1850 mm | 0.2-3.0 mm | 45-100 m/min |
| JSS-4 (1250) | 900-1250 mm | 0.3-4.0 mm | 45-100 m/min |
| JSS-4 (1600) | 1000-1600 mm | 0.3-4.0 mm | 45-100 m/min |
| JSS-4 (1850) | 1000-1850 mm | 0.3-4.0 mm | 45-100 m/min |
| JSS-6(1250) | 900-1250 mm | 0.5-6.0 mm | 30-90 m/min |
| JSS-6 (1600) | 1000-1600 mm | 0.5-6.0 mm | 30-90 m/min |
| JSS-6 (1850) | 1000-1850 mm | 0.5-6.0 mm | 30-90 m/min |
| JSS-10 (1650) | 1000-1600 mm | 3.0-10.0 mm | 20-60 m/min |
| JSL-3S (650) | 300-650 mm | 0.2-3.0 mm | 100 m/min |
| JSL-3S (1250) | 900-1250 mm | 0.2-3.0 mm | 100 m/min |
| JSL-3S (1600) | 1000-1600 mm | 0.2-3.0 mm | 100 m/min |
| JSL-3S (1850) | 1000-1850 mm | 0.2-3.0 mm | 100 m/min |
| JSL-4S (1250) | 900-1250 mm | 0.3-4.0 mm | 100 m/min |
| JSL-4S (1600) | 1000-1600 mm | 0.3-4.0 mm | 100 m/min |
| JSL-4S (1850) | 1000-1850 mm | 0.3-4.0 mm | 100 m/min |
| JSL-6S (1250) | 900-1250 mm | 0.5-6.0 mm | 90 m/min |
| JSL-6S (1600) | 1000-1600 mm | 0.5-6.0 mm | 90 m/min |
| JSL-6S (1850) | 1000-1850 mm | 0.5-6.0 mm | 90 m/min |
| JSL-10S (1650) | 1000-1600 mm | 3.0-10.0 mm | 60 m/min |
Main Products
Automatic hot dip galvanizing plant, Automatic metallic tube coating plant, Continuous steel sheet galvanizing or color coating plant, Steel coil slitting line, Cut-to-length line, Steel tube making plant & peripherals equipment